O.S. B2102 1/8 scale Competition Buggy Engine

$ 799.99 $ 499.99
$ 799.99 $ 499.99
38% OFF
Weight 2 lbs
Dimensions 5 x 7 x 4 in
Categories:, ,

1 in stock

   This is the O.S. Engines Speed B2102 1/8 scale Competition Buggy Engine.    
     ****** Because of the expressed racing nature of this engine, ******      
     ******     it is NOT covered by the O.S. 2 Year Warranty      ******      
FEATURES: Low cylinder head reduces the buggy's center of gravity by 0.67"     
            (17mm) for better stability during aggressive driving              
          Newly designed 22C slide valve carburetor for better fuel economy    
          Tungsten weighted crankshaft with diamond-like coating and silicon   
          Bypass of crankcase is modified for better performance               
INCLUDES: O.S. Engines Speed B2102 Engine with P3 Turbo Glow Plug              
          6.5mm Carburetor Reducer in Red                                      
          Exhaust Seal Ring                                                    
          One each 3mm, 16mm and 18mm Dust Caps                                
          Instruction Manual                                                   
REQUIRES: Exhaust System such as the O.S. Engines T2090SC Tuned Pipe           
          Fuel: 10-30% nitro content, 20% recommended for break-in             
          Air filter, glow starter and track equipment                         
SPECS:      Engine;                                                            
          Displacement: 0.211 cu (3.46 cc)                                     
          Bore: 0.646 in (16.40 mm)                                            
          Stroke: 0.646 in (16.40 mm)                                          
          Practical RPM: 4,000-42,000                                          
          Power Output: 2.65 PS/2.61 hp @ 34,000 rpm                           
          Crankshaft Size: UNF1/4-28                                           
          Distance/Mounting Hole Centers Same Side: 0.83" (21mm)               
          Distance/Mounting Hole Centers Opposite Side: 1.45" (37mm)           
          Width of Crankcase below Mounting Tabs: 1.2" (31.6mm)                
          Width of Mounting Tabs: 1.8" (45mm)                                  
          Height/Mounting Tab to top of Cylinder Head: 2.6" (65.9mm)           
          Height/Mounting Tab to center of Exhaust Outlet: 1.1" (28mm)         
          Height Crankcase Bottom to top of Cylinder Head: 3.2" (81.5mm)       
          Length of Crankshaft end to Front Bearing: 1.2" (29.5mm)             
          Length of Crankshaft end to Backplate: 3.7" (94mm)                   
          Length of Crankshaft end to Center of Crankcase: 2.9" (73.5mm)       
            Carburetor Settings;                                               
            (Carburetor is preset from factory and should only require very    
            small adjustments)                                                 
          Needle Valve: 3 turns open from fully closed                         
          Mixture Control Valve: One turn screwed in from flush position with  
            carb body                                                          
          Metering Needle: 0.3-0.4mm protruding from flush position with carb  
          Throttle Stop Screw: Approximately 0.5mm from carb body when viewed  
            from above                                                         
                                                                   jxs 12/03/17
  • Interior Features
  • Exterior Features
  • Safety Features
  • Extra Features

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.